Notu Cars

2009 Mazda Mazda6 problems and complaints

Owners have filed 386 complaints with NHTSA about the 2009 Mazda Mazda6. The most-reported problem area is structure and body (123 complaints), followed by suspension (76) and air bags (75). The complaints report 8 crashes, 3 fires and 5 injuries. NHTSA lists 9 safety recalls for this model year.

Complaints
386
Recalls
9
Crashes
8
Fires
3
Injuries
5
Deaths
0

What owners report about the 2009 Mazda Mazda6

Complaints by problem area. A complaint can name more than one area, so the bars add up to more than 386.

Structure and body
123
Suspension
76
Air bags
75
Steering
36
Electrical system
32
Wheels and tires
25
Visibility and wipers
17
Engine
16
Lighting
15
Fuel and propulsion
11
Latches and locks
10
Brakes
9
Powertrain
7
Stability and traction control
4
Speed control
2
Seats
2
Seat belts
1

Most-reported specific components

Structure › Body
79
Structure › Frame and members
6
Tires › Valve
6
Tires › Pressure monitoring and regulating systems
5
Latches/locks/linkages › Doors › Latch
4
Structure › Body › Door
3
Visibility › Sun/moon roof assembly
2
Structure › Frame and members › Underbody shields
2

How the 2009 compares with other Mazda Mazda6 years

The 2009 model year has the most complaints of 20 Mazda Mazda6 model years on record. Counts are not adjusted for sales, and newer model years have had less time to collect complaints.

2005 1472006 1732007 1562008 1112009 3862010 2252011 1362012 1002013 232014 1372015 602016 782017 602018 602021 18

All Mazda Mazda6 model years

Mileage when the problem was reported

Based on the 248 complaints that gave a mileage. Half of them were filed at 80,856 miles or less.

Under 25K miles
19
25K–50K miles
40
50K–75K miles
51
75K–100K miles
45
100K–125K miles
39
125K–150K miles
27
150K+ miles
27

When the complaints were filed

Complaints NHTSA received each calendar year about the 2009 Mazda Mazda6. First on Mar 1, 2009, most recent on Jul 16, 2026.

View as table
Year receivedComplaints
20098
20106
20118
20127
201317
201449
201534
201634
201746
201881
201920
202016
202111
20228
202317
202413
20259
20262

2009 Mazda Mazda6 recalls

9 recall campaigns on record, newest first. A recall may cover only some vehicles of this model year. Check your VIN at NHTSA to see whether a recall is open on a specific car.

Air bags › Frontal › Passenger side › Inflator module

Do not drive

NHTSA campaign 19V782000 · Filed Oct 31, 2019 · 69,879 vehicles potentially affected

Defect
Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.

Structure

NHTSA campaign 18V631000 · Filed Sep 14, 2018 · 50,176 vehicles potentially affected

Defect
Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.
Risk
Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.

Air bags › Frontal › Passenger side › Inflator module

Do not drive

NHTSA campaign 18V018000 · Filed Jan 9, 2018 · 70,227 vehicles potentially affected

Defect
Mazda North American Operations (Mazda) is recalling certain 2013 Mazda6 and CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2010 Mazda6, CX-7 and CX-9 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2009 Mazda6, CX-7, and CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began March 2, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F.

Air bags › Frontal › Passenger side › Inflator module

Do not drive

NHTSA campaign 17V457000 · Filed Jul 18, 2017 · 79,402 vehicles potentially affected

Defect
Mazda North America Operations (Mazda) is recalling certain 2012 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Mazda is recalling certain 2009 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Mazda is recalling certain 2007-2008 CX-7 and CX-9 sold, or ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger side air bag inflator with an alternate inflator, free of charge. The recall began October 4, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 17V-012.

Air bags › Frontal › Passenger side › Inflator module

Do not drive

NHTSA campaign 17V429000 · Filed Jun 29, 2017 · 205,377 vehicles potentially affected

Defect
Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.

Air bags › Frontal › Sensor/control module-inactive

NHTSA campaign 16V594000 · Filed Aug 11, 2016 · 41,918 vehicles potentially affected

Defect
Mazda North American Operations (Mazda) is recalling certain model year 2009-2010 Mazda6 vehicles manufactured February 4, 2008, to December 3, 2009. The protective coating may not have been properly applied to the air bag control unit (ACU) and, as a result, moisture may damage the unit causing it to malfunction.
Risk
Failure of the ACU would illuminate the air bag warning light and prevent the air bags from deploying in the event of a crash, increasing the risk of injury.
Remedy
Mazda dealers will replace the ACU, free of charge, however parts are not currently available. The recall began June 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9816H.

Latches/locks/linkages › Doors › Latch

NHTSA campaign 13V425000 · Filed Sep 24, 2013 · 161,400 vehicles potentially affected

Defect
Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose.
Risk
If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury.
Remedy
Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I.

Fuel system, gasoline › Storage › Tank assembly

NHTSA campaign 11V134000 · Filed Feb 25, 2011 · 52,000 vehicles potentially affected

Defect
MAZDA IS RECALLING CERTAIN MODEL YEAR 2009-2010 MAZDA6 VEHICLES MANUFACTURED FROM APRIL 8, 2008, THROUGH FEBRUARY 8, 2010. A CERTAIN TYPE OF SPIDER MAY WEAVE A WEB IN THE EVAPORATIVE CANISTER VENT LINE AND THIS MAY CAUSE A RESTRICTION IN THE LINE. IF THIS OCCURS, THE FUEL TANK PRESSURE MAY BECOME EXCESSIVELY NEGATIVE WHEN THE EMISSION CONTROL SYSTEM WORKS TO PURGE THE VAPORS FROM THE CANISTER.
Risk
AS THE CANISTER IS PURGED REPEATEDLY DURING NORMAL OPERATION, THE STRESS ON THE FUEL TANK MAY EVENTUALLY RESULT IN A CRACK, POTENTIALLY LEADING TO FUEL LEAKAGE AD AN INCREASED RISK OF FIRE.
Remedy
DEALERS WILL INSPECT AND CLEAN UP THE CANISTER VENT LINE, AND INSTALL A SPRING TO PREVENT THIS TYPE OF SPIDER FROM ENTERING THE VENT LINE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE MARCH 25, 2011. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500.

Structure › Body › Door › Hinge and attachments

NHTSA campaign 09V043000 · Filed Feb 4, 2009 · 29,000 vehicles potentially affected

Defect
MAZDA IS RECALLING 29,000 MY 2009 MAZDA6. THE OUTER DOOR HANDLES MAY STICK WHICH MAY PREVENT THE DOOR FROM LATCHING. THIS SITUATION MAY ALLOW THE DOOR TO OPEN WHILE THE VEHICLE IS IN MOTION.
Risk
DRIVING THE VEHICLE WITH THE DOOR UNLATCHED COULD LEAD TO AN UNBELTED OCCUPANT BEING EJECTED AND COULD RESULT IN DEATH OR INJURY.
Remedy
DEALERS WILL INSPECT THE DOOR HANDLES AND IF NECESSARY REPAIR OR REPLACE THE HANDLES FREE OF CHARGE. THE RECALL BEGAN ON FEBRUARY 13, 2009. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.

What 2009 Mazda Mazda6 owners wrote

The 40 most recent of 386 complaints, exactly as filed with NHTSA. These are owners' own accounts and have not been verified.

Jul 16, 2026 · NY

Unknown or other · Suspension

Rear cross member broke due to corrosion breaking off lateral arm from driver side of cross member, I may add the front crossmember was repaired due to recall for extreme corrosion not too long ago, as I research this problem I uncover many owners of this vehicle having the same issue in the northeast,even with much lower mileage.mazda should be held accountable.$3,926.62 for part alone on Mazda parts.com

NHTSA ID 11750964

Apr 29, 2026 · WI

Suspension

The rear subframe rusted out and my control arm broke off! This is extremely serious and because there is no recall I’m going to have to buy an another vehicle. Please issue a recall. I’ve read forms about this and many others have had the same issue with the rear subframe corroding and rotting out.

NHTSA ID 11734456

Nov 17, 2025 · GU

Structure › Body

My rear subframe rusted thru and has holes in it. It is too dangerous to drive and mazda won't recall the rear like the front subframe knowing that a lot of people are suffering from the same issue. A subframe should last a long time. My mechanic inspected the car and feels like it's not safe to drive.

NHTSA ID 11699875

Sep 28, 2025 · KY

Unknown or other

This car was purchased in 2017 and maintenanced regularly. We recently took it to have the oil changed and to check out a noise that was coming from the passenger side. We were told that the subframe was rusted so badly it was too dangerous to drive and would cost $7k to repair. That caught us by surprise and we ended up having to buy a car by the next day. We traded the car in… However, I started doing some research and noted that this is very common and there was a recall between 2010 and 2014. I’m pretty upset that we lost this car without having any recall notification after the purchase. Could this have been taken care of instead of having to get a new car?

NHTSA ID 11690156

Aug 26, 2025 · GA

Suspension

Component or System that Failed: The front subframe on my 2009 Mazda 6i Touring is completely rusted through. There are holes in the frame and large flakes of rusted metal breaking off. The car is available for inspection if needed. Safety Risk: This is a serious safety concern because if the subframe fails, I could lose steering or suspension control while driving. That would put me and other drivers at immediate risk of an accident. Reproduction / Confirmation: An independent mechanic confirmed the problem and told me the car is unsafe to drive in its current condition. Inspection: The vehicle had the original Mazda subframe corrosion recall performed years ago, but now the same exact problem has come back. The car has not yet been re-inspected by Mazda, but the severity of the rust is obvious. Warning Lamps / Symptoms: There were no warning lights or messages before this happened. The issue was only noticed when the rust and holes became visible on the underside of the car during a recent inspection.

NHTSA ID 11683036

Aug 12, 2025 · IN

Suspension

Hello, My name is [XXX] . I took our Mazda 6 in for wheel balance and alignment and was informed of very serious rust issues in the rear suspension. I was pretty shocked at what they showed me. I worked at Raben Tire for 10 years and I've never seen anything like this. I have two retired mechanic friends look at it, and they (along with the mechanic from firestone) said they cannot even fathom how this level of rust is possible (80+% of the miles on this vehicle are highway). One of my retired mechanic friends started looking into it and said he'd noticed the 09 Mazda recalls for suspension rust. We all thought that made sense given how immensely abnormal this rusting is. The recall list sent to me says "front" suspension. I'm not sure why the front is listed and not the rear, but this, to all of us, is very clearly faulty (the rusting is INCREDIBLY abnormal) and we believe should be considered as part of the suspension rust recall (there are no rusting issues anywhere else). Ive provided pictures. This is incredibly unsafe. The rear suspension could collapse at any moment while driving and cause casualties. Thank you for your time, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11680053

May 4, 2025 · NJ

Air bags

The passenger crash pad has deteriorated and become sticky and cracked. This may affect deployment of airbag and perhaps allow outside environmental elements to affect the airbag. The takata fiasco being an example of environmental factors affecting airbag safety.

NHTSA ID 11658729

May 4, 2025 · NJ

Suspension · Structure › Body

The front and rear crossmembers have significant rust. The front has holes and chunks of metal missing due to rust corrosion. The rear has flaking and is deeply pockmarked with rust. These are structural components. Failure can lead to a crash.

NHTSA ID 11658728

Apr 2, 2025 · IN

Suspension

The rear Suspension Frame has failed due to corrosion. The right rear tire has worn severely from the premature failure of that part on the right side. I feel it was a defect in Engineering by Mazda. My email: [XXX] Mobile: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11652399

Mar 24, 2025 · IN

Suspension

The rear frame has failed due to corrosion on the right side. The rear passenger tire is canted in on the topside worn severely worn. This was noted when I drove home from my job. This is a critical part of the vehicle and should've never failed. I'm hopeful to hear from the NHTSB for a repair to be done properly by Mazda;

NHTSA ID 11650252

Mar 10, 2025 · OH

Suspension

Rear suspension cross-member corroded to the point that a minor pothole separated the right lower control arm mounting point from the cross-member, rendering the car undrivable. The rest of the car is fairly rust-free.

NHTSA ID 11647355

Dec 16, 2024 · OH

Suspension

Rear subframe corrosion

NHTSA ID 11630883

Sep 23, 2024 · PA

Structure › Body · Suspension

2009 Mazda 6 Rear subframe and springs are deemed unsafe due to extreme rusting and corrosion. The vehicle is registered and has been registered in both NY and PA (salt states), however was regularly washed and garage maintained. Vehicle will no longer pass inspection due to this issue and Mazda indicates no recall for the rear at this time and is ignoring that this is a highly prevalent issue. Mazda recalled and acknowledged this issue on these makes/models related to the front; however refuses to acknowledge and repair/recall the issue extending to the rear. The vehicle is in otherwise good shape, and the extreme rusting to the subframe/springs is not consistent with normal wear and tear. This is an extremely prevalent issue arising to these vehicles being ignored by Mazda. Mechanics are indicating the issue is extremely deteriorated and not safe, but that the vehicle is in otherwise good shape and the issue is consistent with faulty parts.

NHTSA ID 11616055

Sep 23, 2024 · CA

Air bags · Engine · Fuel/propulsion system

Vehicle jerks at low speed when accelerate and idle when accelerate, P0766 Code shows, engine noise and gears jump, when reverse the vehicle jerks.

NHTSA ID 11615881

Aug 30, 2024 · MI

Electrical system

The sensors on my alarm system will randomly activate, with alarm going off at 30 second intervals. The problem began approximately 6 months ago. I took the initiative to replace my cars battery, along with the battery in my fab. I really thought that solved my problem, as a first step fix. I began once again to identify the sound of my car alarm in multiple parking lots throughout time. I have been investigating this problem, and have read that this alarm problem has been sited by many Mazda 6 owners. I am the original owner of the 2009 Mazda 6 Grand Touring, and have 67,000 miles driven. I called the Repair Department at my dealership, and was told that it cost $185.00 for just the diagnosis. My auto insurance company policy price is based on using a secured vehicle. Right now I only can leave it unlocked in my garage, otherwise, my vehicle is at risk of being stolen.

NHTSA ID 11611849

Jul 30, 2024 · NY

Suspension

This 2009 Mazda 6 hit a chuck hole in the Buffalo NY area, virtually severing the connection between the rear cross member (aka cradle or sub frame) and the right rear wheel and rendering the car all but undriveable. Mechanic said the failure to sufficiently rust proof the subject parts caused severe deterioration of the rear sub frame. This is essentially the same problem that led NHTSA to issue a recall on this vehicle for the front engine cradle in 2018.

NHTSA ID 11605498

Jun 24, 2024 · OH

Suspension

I noticed a rattling sound that seemed to come from the rear passenger side wheel. I took it to a mechanic who told me that the rear sub-frame was so rusted that the damper had come loose from the sub-frame and caused the rattling sound. He said that he was unable to reattch the damper because the sub-frame was too rusted. The only solution was to remove the loose damper to eliminate the rattling sound and continue driving that way OR have the rear sub-frame replaced which would cost from $4,000-$6,000.

NHTSA ID 11596083

May 24, 2024 · CT

Structure › Body

I have a 2009 Mazda 6, the subframe/engine cradle has completely rusted out on the right side causing the lower control arm to detach from the frame while I was driving almost causing a accident luckily I was driving slow at the time. There was a recall for this exact issue, I contacted Mazda and they have no open recalls and can not help me

NHTSA ID 11590508

Apr 8, 2024 · PA

Structure › Body · Suspension

"What component or system failed or malfunctioned, and is it available for inspection upon request?" - Rear subframe. Total rust through due to improper steel alloy and insufficient paint. Same as happened for the front subframe. Front subframe was recalled as 2818I (Mazda's number) and 19V-323, 18V-631 (NHTSA numbers). NHTSA should also mandate rear subframe be recalled. "How was your safety or the safety of others put at risk?" - Total catastrophic structural failure of rear suspension. Would result in a total loss of control while driving. This would likely lead to a severe, possibly fatal accident at-speed. "Has the problem been reproduced or confirmed by a dealer or independent service center?" - As reported by independent service center. "Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others?" - no, this exact vehicle has not been inspected by manufacturer. Manufacturer is doubtless aware of the issue. A cursory google search leads to dozens of identical cases. "Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear?" - there were no warnings of the failure prior to discovery by service center.

NHTSA ID 11581728

Mar 14, 2024 · MA

Structure › Body · Suspension · Unknown or other

I took my car to the mechanic for some routine maintenance and they called to tell me they discovered that the rear subframe is completely corroded. They say the car is not safe to drive, as it could come apart at any moment, and it will cost so much to repair (current estimate is $8000 and still climbing!) that it may be better for me to buy a new car (which I cannot afford). The mechanic expressed shock at how badly the subframe has deteriorated. He said it is in much worse shape than the rest of the car, which I have always maintained carefully. In 2019 my car was recalled for a defective front cross-member, which the dealer replaced. I was told at the time that it was recalled because the coating applied to it was defective and did not protect the part from corrosion. Based on my research, it seems that the same defective coating was applied to the rear subframe, and that it is why it has rusted so quickly and severely. I see that the NHTSA is already aware of this issue - [XXX] . The exact problem I am having is described in [XXX] : "Mazda6 owners told NHTSA there was severe corrosion of the right rear subframes that caused the steering rack mounting bolts to fail." It is completely unacceptable that Mazda replaced the defective part in the front but has not replaced the similarly defective part in the rear, which has failed for the same reason. I am furious that this has made my beloved car, which is otherwise in very good shape and runs beautifully, undriveable. Mazda should be required to repair this severe safety defect, which is entirely their responsibility! Thank you for your time. I look forward to hearing from you at your earliest convenience. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11577381

Mar 2, 2024 · CT

Suspension

Purchased the vehicle, brought it to our mechanic. Was told that the rear subframe was completely rusted, making it unsafe to drive.

NHTSA ID 11575034

Feb 20, 2024 · CT

Suspension

Purchased the 2009 mazda6 for our daughter. Brought it to our mechanic for an electrical issue. We were told that the rear subframe was completely rusted and that the vehicle was unsafe to drive.

NHTSA ID 11572967

Jan 25, 2024 · OH

Suspension

the front crossmember rusted out and broke while driving down the road (per owner), all bolts needed replaced along with the rear engine torque strut mount. Confirmed and replaced by an independent shop 01/20/2024. upon inspection the rear crossmember, lower control arms, bolts, and other parts are all rusted and ready to break at anytime. front crossmember is at the shop for inspection. Car can easily be at shop on a lift for inspection. No warnings.

NHTSA ID 11567834

Jan 10, 2024 · OH Crash

Suspension

Both my back and front chassis are completely rusted through and it’s a complete screwed car. Looking online there is a recall on something like this but not for my model? All I see online is people talking about how they had to scrap their cars because of this issue. The salt and snow has ruined this car and so many people have complained to no avail.

NHTSA ID 11564706

Dec 27, 2023 · MA

Suspension

The contact owns a 2009 Mazda Mazda6. The contact stated the vehicle was taken to an independent mechanic for the replacement of the headlights, and the mechanic discovered that the rear suspension was rusted and corroded while the vehicle was on the lift. Additionally, the passenger’s side rear spring was detached. The mechanic advised the contact that the vehicle was unsafe to drive. The rear suspension needed to be replaced; however, the vehicle was not repaired. The manufacturer was notified of the failure and stated that the vehicle was not included in a rear suspension recall for corrosion and a case was not opened with the manufacturer. The approximate failure mileage was 138,000.

NHTSA ID 11562049

Dec 11, 2023 · OH

Suspension

I brought my 2009 Mazda 6 to the dealership to inspect the suspension after the car began pulling to the right when braking. I was informed the front and rear subframes have failed on this car due to corrosion—even though the front subframe was serviced previously for the recall campaign with the addition of a support bracket. The front subframe will be replaced by Mazda due to the failed recall repair. However, Mazda will not cover the rear subframe at this time because it has not been recalled. The dealership recommends I do not drive the car until the rear subframe is replaced. However, the dealership quoted over $5,000 to replace it due to the high price of the subframe. There is a significant risk the lower control arms can separate from the vehicle due to corrosion, resulting in loss of vehicle control.

NHTSA ID 11559608

Oct 27, 2023 · OH

Suspension

The REAR subframe has rusted out pretty much completely, but the total failure of the right rear spring mount has allowed the spring to punch through the frame, being stopped only by the top plate which has now turned sideways and is lodged between the spring and the floor pan. I understand this is a common problem with this and a few other model years, and has not been addressed by Mazda. I am hoping to help change this.

NHTSA ID 11552178

Oct 25, 2023 · MI

Unknown or other

On October 13, almost lost control of my vehicle while driving at normal speeds in good weather. The car tried to pull off the road with every bump I hit. Drove it to tire dealership as I thought there might be problem with tire or suspension. Mechanic there told me the front engine frame ($595 part, approx $1100 labor) was completely rusted & he didn't know how I was able to drive it. I had it towed to my regular mechanic who said the frame has to be replace. Just in November 2022, I had to pay $290 (parts only) and approx $1100 labor for the rear frame to be replaced due to rust. I know this says the recall had been done but if so, the rear frame shouldn't need replacing again. I tried talking with Mazda for 30 minutes & they were no help. The web is filled with complaints about the front & rear subframes rusting out. It is extremely dangerous for Mazda to ignore this issue. I am attaching receipt from 2022 for the part & will have the receipt soon for the front engine subframe as soon as the mechanic is finished with the work.

NHTSA ID 11551882

Oct 16, 2023 · GA

Air bags

Airbag light indicator continuously flashes. Air bags have been serviced previously under prior recalls.

NHTSA ID 11550138

Sep 24, 2023 · MI

Suspension · Wheels · Structure › Body

* Drivers side (worst) and passenger side rear lower control arm. Both are available for inspection upon request. * The drivers side rear lower control arm rusted through and cracked near the point where it connects to the rear subframe. The right lower control arm did not yet visibly crack (it's still on the vehicle), but it is also severely rusted. If driven and either completely separated, loss of control as well as flying debris on the road would have been nearly certain. * I cannot drive the car to a dealer or service center. The problem is visibly obvious and online owners forums anecdotally indicate the problem is widespread. * The component is available for inspection. I have shown my mechanic and intend to take to a dealer. Because there was no accident or injury, thankfully, I have no cause for engaging police or insurance. * There was no warning/indicator in the vehicle. The first symptom of trouble was severe wear on the inside of the left rear tire. The vehicle then had a four-wheel alignment and suspension components were noted to be tight and adjusted into spec at that point. Some weeks later, we heard disturbing noises from the rear as we went over even small bumps in the road. We noticed the suspicious sound during a local drive and drove gently and directly home, so cannot say how much the partial break may have affected control at that point. Upon inspection, the rusted & cracked steel of the driver's side control arm was readily visible. Other notes: The rear subframe itself shows significant flaking and rust in comparison to the rest of the vehicle's undercarriage, but at least there appears to be more substance left to the metal of the subframe. Photos & measurements available upon request.

NHTSA ID 11546287

Sep 19, 2023 · PA

Suspension · Unknown or other

The rear sub frame on this vehicle was not painted and/or coated to properly withstand the corrosion that is caused by the salt used to treat the roads in the winter. This can cause serious issues.

NHTSA ID 11545380

Aug 25, 2023 · MA

Suspension

There was a recall on the front subframe due to rust. The rear subframe has the same safety issue but there is no recall for that and there should be

NHTSA ID 11540688

Aug 8, 2023 · CT

Suspension

The Rear Frame Suspension Cradle Subframe Crossmember has corroded and my mechanic at Jimmy's Tire and Auto in Granby Ct. says it is unsafe to drive. This corroded part is available for inspection while I wait for a used part to be delivered to complete the repair. No-one else has inspected the part. The condition was discovered when I had sent it in for general maintenance to replace the shocks and rear suspension linkages because there was noise in the rear when driving over bumps. The only warning I had was the odd noise when going over bumps in the road. I recall when buying the used vehicle many years ago that the dealer performed a recall on the front suspension #18V-631 and this shows closed.

NHTSA ID 11537076

Jul 12, 2023 · MI

Structure › Body

The right side of the dashboard melts when the sun is out it’s very sticky and black comes off

NHTSA ID 11531733

Apr 10, 2023 · MI

Steering

While driving 40mph heard a pop, hissing sound and unable to steer vehicle. Stopped at roadside to examine tires, which were ok. Incredibly difficult to steer wheel and to stay on the road while swerving. I was within a mile of Belle Tire for a mechanic to look at my Mazda 6. He showed me how the open recall on the front crossmember was repaired only on the right wheel side, and the left front wheel had the same amount of rust completely broken apart. A phone call was made to the Mazda dealer closest, problem was relayed to service manager, and said even with my pictures, Mazda needs inspection on vehicle, and wait for repair was a month. As my only vehicle ,it took 2 days to get repaired by Belle Tire. I went with my receipt, and 10 photos, to the Service Department Manager that did the original recall work to discuss what transpired, and request a reimbursement for the incomplete repair on this open recall. He was not there. I then asked to speak to the Service Department Director. He also was not there. The Mechanic Supervisor took my name and phone number for one of the managers to call me regarding this problem. I have not received any communication from either Managers, which now has been since last week. There were NO warning lights on the dashboard when this occurred. I have had this vehicle since new, and only 61,000 miles.

NHTSA ID 11516388

Mar 16, 2023 · IN

Suspension · Unknown or other

Rear subframe corrosion/complete rot out, suspension complete rot out, and other components due to salt from the road and Mazda not correctly painting the components: 2009 Mazda 6I 2.5 Noticable drop in the back of the car. The tire wells are almost touching the rear tires. The rear tires are leaning inward, also putting inside ware on the new tires. The rear of the vehicle fishtails while driving. It takes bumps very hard. No suspension. When you hit a bump, the rest of the car is all over the road. Very dangerous driving conditions, as the fishtailing throws you into other lanes, possibly into other traffic. Took vehicle to Meinke on 3-15-23, was told and shown the damages to the rear suspension and rear subframe and other rear components. Vehicle is not safe to drive until fixed. Called Mazda dealer, was notified of recall on front subframe, but not the rear. Have appointment on 3-29-23 to drop off at Mazda dealer to get the front subframe serviced. My front subframe is not the issue, not that I know of yet anyways. My rear is the issue. Why was it not recalled with the front? Why are they allowed to risk the lives and safety of so many for not servicing the rear also? This needs to be recalled, and I am definitely going as far as I can into getting something done about this. I do not have the funds to pay out of pocket to get this fixed, or funds to go out and buy a new car. I am a mother of a toddler, and disabled. I'm hoping to get a class action lawsuit against Mazda for this, or at the VERY least, a recall to fix this issue also. I live in Indiana, we have some snowy winters, so salt is used on the roadways. I believe the car came from Ohio before I purchased it from Kentucky. I purchased the car on March 27, 2021. Have only had "normal" maintenance issues or water and tare before this, and actually love the vehicle! It has been a great vehicle, other then this issue.

NHTSA ID 11512106

Mar 6, 2023 · WV

Suspension

The rear subframe of my car is severely corroded. Both dampers (not sure if I have that name right, the cylinder inside the rear suspension coil) have rusted off. The rear left lateral control arm has rusted off. It is higher in mileage so it might be expected, except, other owners have reported the same problem with way less miles. Also there was a recall for the front crossmember in salt states for the same issue but nothing issued for the rear. Driving on a rusted subframe could potentially cause major components of the rear end to rust and break off while driving causing an accident. If the front was poorly coated and had potential for severe premature corrosion, the back should also be addressed as well. Had there been something earlier many owners would not be facing the risk of a potential hazard.

NHTSA ID 11510342

Feb 25, 2023 · IL

Structure › Body

Rear subframe rust got so bad the control arm snapped off and nearly killed my family.

NHTSA ID 11509081

Feb 17, 2023 · KY

Structure › Body

Rear subframe rusted completely out

NHTSA ID 11507845

Jan 19, 2023 · CT

Unknown or other

The rear subframe is absoutley rotted out from the car. Bought used and did not see until recently. Car was a Rhode Island car and was in Mass for a while. The rear wheels are concaved in and it is not only my car MULTIPLE owners of this generation car have experienced this these cars obly have the front subframe but not the rear! This particulat rear subframe is especially rotted THROUGH near the suspension! This is NOT ONLY MY CAR BYT MULTIPLES MAZDA 6'S!!! GOOGLE IT! I WILL SEND PICTURES LATER WHEN REQUESTED! IT IS LATE AND RAINING RIGHT NOW!

NHTSA ID 11502723

Source: NHTSA complaint and recall records, complaints received through Nov 18, 2026. How we count