Notu Cars

2011 Mazda Mazda6 problems and complaints

Owners have filed 136 complaints with NHTSA about the 2011 Mazda Mazda6. The most-reported problem area is suspension (51 complaints), followed by structure and body (30) and air bags (28). The complaints report 8 crashes, 1 fire and 6 injuries. NHTSA lists 6 safety recalls for this model year.

Complaints
136
Recalls
6
Crashes
8
Fires
1
Injuries
6
Deaths
0

What owners report about the 2011 Mazda Mazda6

Complaints by problem area. A complaint can name more than one area, so the bars add up to more than 136.

Suspension
51
Structure and body
30
Air bags
28
Steering
17
Lighting
11
Electrical system
8
Visibility and wipers
5
Brakes
4
Fuel and propulsion
4
Engine
3
Powertrain
3
Wheels and tires
2
Speed control
1
Seat belts
1

Most-reported specific components

Structure › Body
21
Suspension › Subframe/mounting bracket
2
Structure › Frame and members › Underbody shields
1
Exterior lighting › Headlights
1

How the 2011 compares with other Mazda Mazda6 years

The 2011 model year has the 9th-most complaints of 20 Mazda Mazda6 model years on record. Counts are not adjusted for sales, and newer model years have had less time to collect complaints.

2005 1472006 1732007 1562008 1112009 3862010 2252011 1362012 1002013 232014 1372015 602016 782017 602018 602021 18

All Mazda Mazda6 model years

Mileage when the problem was reported

Based on the 61 complaints that gave a mileage. Half of them were filed at 89,914 miles or less.

Under 25K miles
5
25K–50K miles
7
50K–75K miles
12
75K–100K miles
11
100K–125K miles
15
125K–150K miles
4
150K+ miles
7

When the complaints were filed

Complaints NHTSA received each calendar year about the 2011 Mazda Mazda6. First on Nov 21, 2011, most recent on Nov 3, 2026.

View as table
Year receivedComplaints
20111
20123
20132
20144
201510
201614
201721
201812
201911
20209
20219
20227
20238
202412
20256
20267

2011 Mazda Mazda6 recalls

6 recall campaigns on record, newest first. A recall may cover only some vehicles of this model year. Check your VIN at NHTSA to see whether a recall is open on a specific car.

Air bags › Frontal › Passenger side › Inflator module

Do not drive

NHTSA campaign 19V782000 · Filed Oct 31, 2019 · 69,879 vehicles potentially affected

Defect
Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.

Structure

NHTSA campaign 19V323000 · Filed Apr 25, 2019 · 51,118 vehicles potentially affected

Defect
Mazda North American Operations (Mazda) is recalling certain 2011-2013 Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland,Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The front cross member may corrode after exposure to road salt.
Risk
Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began June 13, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I. Note: This recall is an expansion of Recall 18V-631.

Air bags › Frontal › Passenger side › Inflator module

Do not drive

NHTSA campaign 18V717000 · Filed Oct 12, 2018 · 155,436 vehicles potentially affected

Defect
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 CX-7, and 2011-2015 CX-9 sold, or ever registered in the states of Arizona, Arkansas, Delaware, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, West Virginia and the District of Columbia, or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 CX-7, and 2010-2015 CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began November 9, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 1317F.

Air bags › Frontal › Passenger side › Inflator module

Do not drive

NHTSA campaign 17V429000 · Filed Jun 29, 2017 · 205,377 vehicles potentially affected

Defect
Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.

Fuel system, gasoline

NHTSA campaign 14V114000 · Filed Mar 11, 2014 · 42,000 vehicles potentially affected

Defect
Mazda North America Operations (Mazda) is recalling certain model year 2010-2012 Mazda6 vehicles manufactured September 14, 2009, through May 2, 2011, and equipped with 2.5L engine. In the affected vehicles, spiders may weave a web in the evaporative canister vent hose, blocking it and causing the fuel tank to have an excessive amount of negative pressure.
Risk
Negative pressure could cause the fuel tank to crack resulting in a fuel leak, increasing the risk of a fire.
Remedy
Mazda will notify owners, and dealers will reprogram the powertrain control module and inspect and clean the canister vent line. If a web was found in the line, the fuel tank and check valve on canister vent line will be replaced. These repairs will be done free of charge. The recall began on April 30, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number associated with this campaign is 7214C.

Latches/locks/linkages › Doors › Latch

NHTSA campaign 13V425000 · Filed Sep 24, 2013 · 161,400 vehicles potentially affected

Defect
Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose.
Risk
If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury.
Remedy
Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I.

What 2011 Mazda Mazda6 owners wrote

The 40 most recent of 136 complaints, exactly as filed with NHTSA. These are owners' own accounts and have not been verified.

Nov 3, 2026 · OH

Steering · Suspension

The frame rusted through and broke where the lower control arm attaches on the passenger side. This caused an immediate pull to the right and nearly caused a wreck. The car was towed to a local mechanic shop who reported the problem. Mazda is currently not taking responsibility for this even though it was a known issue and a recall was issued for this exact issue.

NHTSA ID 11775340

Sep 20, 2026 · OH

Suspension · Steering · Wheels

Crossmember is rusted out and car is undriveable. There is a recall on the crossmember front subframe

NHTSA ID 11765687

Jun 17, 2026 · 92,000 miles · NE

Structure

The contact owns a 2011 Mazda Mazda6. The contact stated that while driving at an undisclosed speed and coming to a stop, the steering wheel was not operating properly. Several days later while the contact's wife was driving at an undisclosed speed, there was play in the steering wheel. Additionally, there was an abnormal sound coming from the passenger’s side wheel. The contact stated that the wheel was turning abnormally. A mechanic arrived at the residence to diagnose the vehicle and determined that the sub frame was rusted. While touching the sub frame, pieces of the sub frame fractured. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 92,000.

NHTSA ID 11744830

May 15, 2026 · 115,000 miles · WI

Structure · Suspension

The contact owns a 2011 Mazda Mazda6. The contact stated that while driving at 25 MPH, the contact attempted to swerve out the way of another vehicle as she suddenly lost control of the vehicle. Due to the failure, the contact force to steer the vehicle to the left as the contact attempted to maintain control of the vehicle. The contact managed to pull over into a parking lot and called her husband for assistance. Despite the failure, the contact managed to drive the vehicle home despite the vehicle being extremely difficult to maneuver. The contact's husband managed to drive the vehicle to a local mechanic, who determined that the front subframe had failed due to excessive corrosion of the subframe. The mechanic then informed the contact of NHTSA Campaign Number: 19V323000 (Structure, Suspension); however, the contact was informed that her vehicle was not included in the recall. The manufacturer was notified of the failure where they confirmed that the vehicle was not included in the recall. The vehicle remained in the mechanic's possession and had yet to be repaired. The failure mileage was 115,000.

NHTSA ID 11738066

Apr 13, 2026 · MN

Structure › Body

Front Subframe has corroded and broke. There is a recall on the subframe that was repaired by dealership in 2019, but this repair did not fix the issue since it has now rusted through and broke. The repair was faulty.

NHTSA ID 11730786

Mar 5, 2026 · NE

Structure › Body · Wheels · Unknown or other

Car developed a known recall issue problem, Recall 2818I. Even though Nebraska was not listed as a "salt state", it's obvious that Nebraska has similar conditions to Iowa. Attempts to contact Mazda USA corporate would not even fix the issue, citing cars age and other factors even though the damage is very specific to this particular recall.

NHTSA ID 11722303

Jan 25, 2026 · CO

Suspension · Steering · Structure › Body

2011 Mazda6 A serious safety defect occurred on my vehicle and matches NHTSA Recall 19V-323 / Mazda Recall 2818I (front cross member corrosion due to insufficient coating) despite this recall not being associated with my VIN. Front cross member cracked due to rust, causing loss of steering control, wheel misalignment, and scraping from the front wheel. This is exactly the failure described in the recall (breakage of the cross member and reduced steering control, increasing the risk of a crash). My safety and the safety of others were put at risk. Although my VIN is not currently associated with the recall, all conditions of the recall apply to my vehicle: -2011 Mazda6 within the affected production range -Defect is a manufacturing issue (insufficient paint coating) -Vehicle was registered in Missouri from 2023-2025, which is a listed state The only reason this recall was not associated with my VIN is because the vehicle was not registered in Missouri at the exact time of the 2019 recall campaign. This is an administrative gap, not a safety distinction. It should not be allowed to limit a manufacturer safety defect to specific states. Vehicles move across state lines constantly. A defect that causes loss of steering control does not stop being dangerous when a car crosses a border. Registration records alone did not reflect actual vehicle use or risk. If recalls are state-limited, manufacturers and NHTSA must continue tracking registration changes and associate the recall with the VIN as soon as a vehicle becomes registered in an affected state. Rust is progressive and age-related. Since this recall began in 2019 and it is now 2026, affected vehicles are more likely to experience failure, and many are now registered in different states than they were in 2019. I am requesting that NHTSA associate Recall 19V-323 with my VIN, investigate the adequacy of state-limited recall tracking, and take action to prevent this known safety defect from causing additional crashes.

NHTSA ID 11713263

Nov 21, 2025 · OH

Unknown or other · Suspension

When I took the car into my ASE mechanic shop for a normal oil change and tire rotation, they performed a general overall car inspection. They noticed that the Driver Side Rear Subframe had rusted through completely, where the coil spring is located. The passenger side was rusted, but has not yet broke through. They stated that the subframe parts should not rust through like this. They also stated that it is dangerous to drive the car in this condition. I have not notified the manufacturer as of yet, but plan to do so. There were no warning lights, but the ride did seem to be rougher than normal. The attach photos contain 2 photos of the failed driver side rear subframe and 1 photo of the good, passenger side rear subframe.

NHTSA ID 11700788

Oct 26, 2025 · MA

Suspension

2011 Mazda6 rear subframe rot/rust, unsafe and dangerous to drive, Same situation as the front subframe that is part of a recall.

NHTSA ID 11695663

Aug 22, 2025 · NE

Structure › Body · Suspension

The front and back cross members underneath my Mazda6 have completely rusted out. There are numerous complaints about Mazda's "Safety Recall 2818I Expansion" not covering the back support member and also not considering Nebraska to be a Salt Belt state despite the state, and specifically Omaha using salt to treat their roads in the winter. On [XXX], my front cross member completely failed due to rust, causing my vehicle to lose control. I've taken my car to the mechanic and they confirmed the front and back cross members are completely rusted and need replacement costing $7,000. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11682499

Aug 19, 2025 · 150,000 miles · IL

Structure · Suspension

The contact owns a 2011 Mazda Mazda6. The contact stated that while her mother was driving at slow speeds in a parking area, there was an abnormally loud metallic sound coming from underneath the vehicle, and moments later, the vehicle became extremely difficult to maneuver. No warning lights were illuminated. The vehicle was towed to the dealer, who determined that the rear crossmember had detached from the vehicle due to excessive corrosion of the subframe. The contact was informed that the vehicle could not be repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V323000 (Structure, Suspension); the VIN was previously included, but was repaired in 2019. The contact stated that the recall repair was for the front passenger’s side lower control arm. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 150,000.

NHTSA ID 11681707

Jun 12, 2025 · NY

Steering

Alignment is off. Recall for my type of call for the control arm weakening and causing wheel alignment problems. Why isn't mine part of recall??

NHTSA ID 11666615

Mar 20, 2025 · MA

Suspension

Front and rear subframe rust leading to gaping holes, outside of normal wear and tear.

NHTSA ID 11649538

Nov 25, 2024 · 100,000 miles · IN

Structure · Suspension

The contact owns a 2011 Mazda Mazda6. The contact stated that while the vehicle was at the dealer for routine service, the vehicle was diagnosed with rust and corrosion of the sub-frame. The contact was informed that the sub-frame needed to be replaced. The vehicle was not repaired. The contact was informed of NHTSA Campaign Number: 19V323000 (Structure, Suspension); however, the VIN was not included in the recall. The manufacturer was made aware of the failure. The contact was advised to contact the NTSA Hotline to report the failure. The failure mileage was approximately 100,000.

NHTSA ID 11627207

Sep 30, 2024 · 184,000 miles · NY

Suspension

The contact owns a 2011 Mazda Mazda6. The contact stated that while reversing, the contact heard an abnormal snapping sound coming from the rear passenger’s side of the vehicle. The vehicle was stopped and inspected, where the contact observed a big spring pushing a bar into the ground on the rear passenger’s side. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 184,000.

NHTSA ID 11617312

Aug 12, 2024 · PA

Suspension

The rear cross member / AKA (Rear Subframe) P/N GEG1-28-80X has completely rusted out. The car is no longer safe to drive per a Pennsylvania State inspection. If driven parts of the rear suspension will drop off the car creating a hazard to other motorists and the driver of the car can lose control / mobility causing a traffic accident. Picture the entire rear suspension suddenly collapsing, that is what is going to happen. The Front subframe was subject to a recall. That recall should have included the rear as it is the same material just a few feet away, subject to the same rusting issues. These subframes were not property designed to prevent rust or even withstand a little moisture, as my car has been very well maintained. When I read the online forms this is a flaw in ALL 2009- 2013 Mazda 6's and the sister car the Ford Fusion and Mercury Milan. I have opened a case with Mazda USA case #[XXX]. They are going to inspect to confirm my mechanic diagnosis. However they are currently under no obligation to repair and replace the rusted parts but they should be as this should have been replaced when the front subframe recall was performed. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11608007

Jul 31, 2024 · WV

Suspension · Structure › Body

After getting the recall information about the front crossmember rusting out due to corrosion, I decided to check the rear crossmember on my car. WOW, the rear crossmember is SO much worse than the front one and I’ve read hundreds of similar stories about the exact same thing happening to other Mazda 6 sedans around these model years (2009-2013). The rear crossmember on my car, which supports the entire rear suspension is completely rusted thru in several spots and the lower end links aren’t even attached anymore because the brackets literally fell off and so now both back tires are leaning in at the top. It is very noticeable! Very unsafe to drive! I decided to park this car until a solution is reached with Mazda or the NHTSA on how to deal with this. I don’t know why the front crossmember was recalled but not the rear? There’s only 2 things that are rusted on my car, period…the front & rear crossmembers!

NHTSA ID 11605695

Jul 29, 2024 · 129,000 miles · MA

Structure · Suspension

The contact owns a 2011 Mazda Mazda6. The contact stated that while the independent mechanic was performing an oil change on the vehicle, the independent mechanic informed the contact that the rear subframe was severely rusted with holes in the subframe. The vehicle was taken to the dealer, where it was determined that the rear subframe needed to be replaced. The vehicle was not repaired. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 19V323000 (Structure, Suspension). The manufacturer was notified of the failure and informed the contact that the VIN was not included in the recall. The failure mileage was approximately 129,000.

NHTSA ID 11605184

Jul 21, 2024 · PA

Suspension

I'm filing a complaint as to substandard steel being used in the rear crossmember/rear subframe. Extensive corrosion has been confirmed upon a state inspection, which requires replacement at my personal cost. The front engine cradle was replaced in 2019, per a recall notice for the same extensive corrosion problem. A safety issue that needs to be addressed by Mazda.

NHTSA ID 11603648

Jun 18, 2024 · NJ

Suspension · Steering

Completely rusted rear crossmember subframe

NHTSA ID 11595019

May 6, 2024 · 89,000 miles · ND

Structure · Suspension

The contact's daughter owns a 2011 Mazda Mazda6. The contact stated that while her daughter was driving at an undisclosed speed, the steering wheel inadvertently moved to the left at a 30–35-degree angle. Additionally, the rear end of the vehicle swayed while coming to a stop. The vehicle was taken to an independent mechanic, who determined that the crossmember was severely corroded and the front driver's side crossmember had cracked. The vehicle was then towed to the dealer, where it was diagnosed that the front sub frame, sub frame link, sway bar, sub frame nuts, and bolts needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The contact related the failure to NHTSA Campaign Number: 19V323000 (Structure, Suspension); however, the VIN was not included in the recall. The failure mileage was approximately 89,000.

NHTSA ID 11587143

Apr 2, 2024 · NY

Suspension

Rear subframe rusted and cracked in half when my daughter was on a major highway!

NHTSA ID 11580652

Mar 16, 2024 · OH

Suspension

My 2011 Mazda 6 rear suspension broke while my wife was driving our car on the highway. It could have killed my wife and son. The frame is rusted so bad that the lower control arm broke away from the frame, the rear wheel is barely hanging on it by one bolt on the front control arm. It is very much a safety issue and Mazda needs to take charge of the problem before someone dies in their vehicle. Our car has 106215 miles on it and we still owe alot of money on this thing.

NHTSA ID 11577809

Feb 9, 2024 · IL

Steering · Unknown or other

Bought. A 2011 Mazda 6, and took it to a Mazda dealer for an inspection. They found the rear sub frame ie rear cradle to be extremely rusted out, the shocks on both side are detached, and the springs look like they may push through at any point and do more damage. The car is unsafe to drive and the dealer estimated a repair cost or $4322.99 to fix.

NHTSA ID 11570961

Feb 7, 2024 · WV

Structure › Body · Suspension

The rear cross member/subframe is completely rusted in two and the rear lower forward control arm is detached from cross member/subframe on both sides. There is currently an active recall for the front cross member due to accelerated corrosion from road salt but I’m not aware of any inclusion of the rear frame or suspension components tied in with this recall. It definitely needs added to it as this is VERY dangerous, possibly even more so than the front. Rest of the actual car body is fine, except for a little bit of surface rust. Please add this to the current corrosion recall! Car is registered in WV and is available for inspection anytime and I will be attaching pictures and I also have a video but it won’t let me post it on here.

NHTSA ID 11570675

Dec 13, 2023 · KS

Steering · Suspension

Turning onto a road, heard a loud thud from the front passenger corner. Car steering became highly erratic. Parked the car, noticed the front passenger wheel was crooked. Took it to the nearest shop and they said the crossmember was rusted completely through and snapped, causing the control arm to lose control. Found out there is a recall for the car model and year for this exact issue, but my car wasn't covered by it, so I did not receive notification of it, but it clearly affects this VIN as well.

NHTSA ID 11559875

Dec 9, 2023 · PA

Suspension

Noticed the left rear tire suddenly had a lot of negative camber and there were now clunking sounds while driving. Inspection showed that the rear crossmember is severely rusted with holes, cracks, and delamination. The left toe link mount is completely separated, the coil spring stoppers are detached and loose inside the springs, and the right coil spring has the top coil broken off. The front body connection of the rear crossmember is barely connected. The level of corrosion on the rest of the car is drastically less than the rear crossmember. Currently deciding whether and how to repair. (Pennsylvania)

NHTSA ID 11559265

Jul 22, 2023 · MA

Suspension · Steering · Structure › Body

I purchased a used vehicle in NH from a private seller "as is", repaired tires and brakes, passed MA state inspection and dropped the car off to address the recall, which I had researched via a VIN number search. The dealership informed me that the body had corroded beyond repair, and they cannot perform the required repair for the recall. While the dealership has been helpful, this looks like a major underlying manufacturing flaw for a vehicle at 115K built in 2011.

NHTSA ID 11533800

Jul 7, 2023 · PA

Suspension · Unknown or other

Rear K frame is completely rusted out. You investigated the front frame rust issues on these cars which resulted in a Mazda recall. However, the rear frame with the same structure weaknesses was left out. As a result Mazda is refusing to fix or replace thousands of vehicles. Mazda forums are full of drivers with this same exact issue. If these frames start to fail while being driven I see the potential for injuries or loss of life.

NHTSA ID 11530798

Jun 5, 2023 · WI

Suspension

When Mazda recalled the front frame they should’ve fixed the rear frame too I believe that this should have been recalled because there is the same problem all over the internet with this model. When my 16 year old daughter was going down the road @ 60mph and the rear subframe broke - bent the exhaust and then the tire rubbed the wheel well smoked like crazy and thought is was on fire & it then had blow out on the highway. Had to have it towed as putting the spare on would have done no good .

NHTSA ID 11525400

Feb 8, 2023 · VA

Suspension

During Virginia State Vehicle Safety Inspection in January 2023, the inspector noted a problem with severe rust in the rear Cross-Member (part 28-800A). The rear Cross-Member is severely rusted and crumbling at fastening and stress points. The driver side (left side) of the cross-member that secures the top of the (left) coil spring is so deteriorated that the left stopper (28-111B) became unattached from the top of the mount and is freely floating inside the coil spring, causing visible damage to the coil spring when the stopper (made of steel with rubber on bottom) and the coil spring come in contact. The same problem is occuring on the passenger side (right) of the rear crossmember as the upper mount is severely rusted and crumbling. If the Cross-Member mounts collapse or the Coil Springs break while the vehicle is moving, the driver would have extreme difficulty maintaining safe control of the vehicle.

NHTSA ID 11506208

Feb 7, 2023 · OH

Suspension

I heard that the mazda 6 was recalled for a front end suspension issue with rust.My mazda 6 had a problem with rust on the rear crossmember.It rusted out and came apart. I noticed the car was leaning to one side,had it checked out and the crossmember was rusted and broke. I am in the process of buying another car.Mechanic told me not to drive it very far.If the car was recalled because of rust on front suspension of car it probably has same issue on back suspension.

NHTSA ID 11505965

Jan 3, 2023 · OH

Suspension

The front sub frame was recalled due to SEVERE rot and corrosion. It was replaced at the dealers cost. The issue is the rear subframe has the exact same, if not worse rot and corrosion. I called the dealer and no recall is issued. Thousands of people are having the same issue

NHTSA ID 11499869

Nov 11, 2022 · TN

Suspension

October 11, 2022 I hit a steep curb while pulling into a gas station before heading to work, which caused alignment issues. I originally thought it was just about that time for an alignment so I drove my car to tire discounters. [XXX] the manager there called me and told me pretty much the sub frame on my car was rusted so bad that he doesn’t even know how I made it to their facility, and pretty much it would cost more to fix than the car is worth, so I should think about trading it in or I would have to look elsewhere for someone to fix the sub frame. After google search about this particular part, my store manager found a recall for the Mazda subframes claiming the listed states fail to put a coating on the subframe to protect the car from rusting. The car originated from Michigan which was one of the states listed on the recall list, so I called Nelson Mazda in Murfreesboro, TN and they had informed me that this particular part was already fixed in 2019 but judging by the picture [XXX] from tire discounters sent me. No one actually fixed anything, so someone falsely lied on documentation so [XXX] from Mazda agreed to take a look at it and he agreed that this sub frame was not “properly” done and had to wait a couple days to get approved in order to redo the recalled part. Well due to sub frame rusting caused additional problems like replace the front uppers control arm, the struts, the front control arm, and the tie rod end needs to be replaced as well. I specifically asked [XXX] if the sub frame was done correctly the first time would these additional problems exist and without any extra explanation he said “No.”, but he informed me Mazda is only taking care of the subframe at no cost, and an alignment. The alignment would prove useless without catering to the other maintenance that needs attention as well, and I do feel since the recall wasn’t not done properly I should not be responsible for additional costs as well. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID 11493224

Sep 12, 2022 · NY

Suspension

I was driving my Mazda today and while I was pulling into a parking lot I hit a pothole and my rear frame broke and now the car is sitting on one side almost touching the back right tire, when Mazda recalled the front frame they should’ve fixed the rear frame too I believe that this should have been recalled because there is the same problem all over the internet with this model.

NHTSA ID 11484138

Sep 11, 2022 · NY

Suspension

The rear subframe is badly rotting out and broken in i right rear side. There is a large hole in the subframe next to the spring . The garage said it is not safe to drive. Same issue with the front frame and it was replaced under recall.

NHTSA ID 11483875

Sep 4, 2022 · TX

Exterior lighting

The headlights are increasingly failing. They are so dim that i can not safely drive at night. They burn out easily. I have to replace them about 4 times a year now. In the first few years of owning the car the headlights were fine. But now it is a major safely issue for myself and others on the road. It seems like with age the headlights or components are wearing out. I am considering getting rid of this car only due to the headlights. I have considered changing to a xenon system but i am scared of the wiring and do not want to risk a wiring issue. This is my only concern with this car and it appears that most who have the same car have the same headlight issue. This should be recalled to save lifes! It is dangerous to drive this car at night with such poor lighting.

NHTSA ID 11482799

Aug 4, 2022 · 200,000 miles · OH Crash 1 injury

Suspension › Subframe/mounting bracket

The contact owns a 2011 Mazda MZ6. The contact stated that while her son was driving at approximately 60-65 MPH, the rear subframe had detached, causing the vehicle to spin across four lanes of traffic and then crash into the median wall. The air bags were not deployed. A police report was filed that listed the cause of failure as a passenger's side rear tire blowout due to cracks along the tire. The contact's son sustained a back injury and medical attention was received. The vehicle was towed to the contact's residence where an independent mechanic diagnosed that the rear subframe had detached. The manufacturer was made aware of the failure and a case was opened. The failure mileage was approximately 200,000.

NHTSA ID 11477574

Jul 13, 2022 · OH

Unknown or other

Crossmember rust causing a hole which effects driving the vehicle, because of the safety issue

NHTSA ID 11473676

Mar 12, 2022 · VA

Structure › Body

Corrosion on the rear subframe as a result of salt on roadways used to clear snow

NHTSA ID 11456434

Source: NHTSA complaint and recall records, complaints received through Nov 18, 2026. How we count